Gold Plan
Each month, HandyGal will spend a minimum of 2 hours addressing the items on each month’s list of included services. Extra time will be dedicated to the homeowner’s to-do list of projects. Additional time is available to be added at the rate of $50/hr.
All packages are customized to fit the needs of the specific home and homeowner. An initial on-boarding inspection will be completed with the homeowner to determine a custom home plan.
Below is a baseline example of monthly checklists for this package:
January
Vacuum & clean bathroom fan grilles
Clean food trap in dishwasher
Test and sanitize garbage disposal
Vacuum refrigerator coils
Vacuum/clean exterior vent covers
Check main water shut off valve for correct operation/leaks
Check flush mechanism and shut off valve on toilets for operation/leaks
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
February
Inspect all faucet shut off valves for operation/leaks.
Inspect all faucet aerators. Clean/replace as needed.
Test all drains. Clean and adjust stoppers as necessary.
Test and tighten all knobs, handles, and hinges throughout the house.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
Visual perimeter inspections of exterior of the house.
March
Check water filters. (In-line, refrigerator, etc)
Clean all sink P-traps, re-install, and check for leaks. Repair/replace as needed.
Clean furnace and A/C condensation lines and pump boxes if applicable
Clean humidifier filter (if applicable)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
April
Test sump pump for operation and inspect basin (unsealed basins only)
Inspect gutter downspouts and any first-story gutters. Advise homeowner of gutter cleaning/damage repair as needed.
Inspect household fire extinguisher(s)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
Visual perimeter inspections of exterior of the house.
May
Turn on exterior hose bibs (if they have a shutoff), check for proper operation/leaks, and hook up hoses as needed.
Check all window/door screens and repair/replace as needed.
Check all ceiling fans for proper operation/tighten blades.
Turn off gas fireplace pilot and clean fireplace glass (if applicable)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
June
Clean range vent grease filter.
Clean around and inspect the A/C unit.
Clean exterior vent covers.
Lubricate garage door tracks and test for proper operation.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
Visual perimeter inspections of exterior of the house for minor issues like caulk repairs, vent obstructions, insects, wasp nests, etc..
July
Clean food trap in dishwasher
Test and sanitize garbage disposal
Vacuum refrigerator coils
Fill minor asphalt and concrete cracks (minor = less than ¼”)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
August
Inspect all faucet shut off valves for operation/leaks.
Inspect all faucet aerators. Clean/replace as needed.
Test all drains. Clean and adjust stoppers as necessary.
Test garage door safety shut-off function
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
September
Clean entire length of dryer vent
Inspect and tighten laundry hoses and check laundry shut off valves for proper operation/leaks.
Replace thermostat battery
Inspect and vacuum all window/door screens
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
October
Inspect and test gas fireplace and light pilot (if applicable)
Inspect exterior hose bibs for operation/leaks
Disconnect, drain, and put away hoses for winter
Winterize exterior plumbing and AC unit
Inspect and spray out gutters (Includes 100 feet of gutters under normal conditions, not exceeding 22’ above the ground)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
November
Clean furnace and A/C condensation lines and pump boxes if applicable
Clean humidifier filter (if applicable)
Inspect and clear out window wells.
Inspect weather stripping around exterior doors
Check all windows for proper weather sealing. Verify window locks work.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
December
Test all smoke/CO2 detectors and replace all batteries.
Test/replace garage door keypad batteries.
Replace thermostat battery.
Empty/clean washing machine drain pump filter.
Adjust/lubricate problem doors/locks.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.