Silver Plan
Each month, HandyGal will spend a minimum of 2 hours addressing the items on each month’s list of included services. Extra time will be dedicated to the homeowner’s to-do list of projects. Additional time is available to be added at the rate of $50/hr.
All packages are customized to fit the needs of the specific home and homeowner. An initial on-boarding inspection will be completed with the homeowner to determine a custom home plan.
Below is a baseline example of monthly checklists for this package:
January
Vacuum & clean bathroom fan grille(s)
Clean food trap in dishwasher
Test and sanitize garbage disposal
Check flush mechanism and shut off valve on toilet(s) for operation/leaks
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
February
Inspect all faucet shut-off valves for operation/leaks.
Inspect all faucet aerators. Clean/replace as needed.
Test all drains. Clean and adjust stoppers as necessary.
Test and tighten all knobs, handles, and hinges throughout the house.
Monitor water softener and furnace filter.
Fill/replace as needed.
Test all smoke/CO2 detectors.
March
Check water filters. (In-line, refrigerator, etc). Replace if needed (cost of filter not included)
Clean all sink P-traps, re-install, and check for leaks. Repair/replace as needed.
Clean furnace and A/C condensation lines and pump boxes if applicable
Clean humidifier filter (if applicable)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
April
Inspect household fire extinguisher(s)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
Check main water shut off valve for correct operation/leaks
May
Check all window/door screens and repair/replace as needed.
Check all ceiling fans for proper operation/tighten blades.
Turn off gas fireplace pilot and clean fireplace glass (if applicable)
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
June
Clean range vent grease filter.
Vacuum refrigerator coils
Lubricate garage door tracks and test for proper operation.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
July
Clean food trap in dishwasher
Test and sanitize garbage disposal
Vacuum refrigerator coils
Clean exterior dryer vent
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
August
Inspect all faucet shut off valves for operation/leaks.
Inspect all faucet aerators. Clean/replace as needed.
Test all drains. Clean and adjust stoppers as necessary.
Test garage door safety shut-off function
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
September
Clean entire length of dryer vent
Inspect and tighten laundry hoses and check laundry shut off valves for proper operation/leaks.
Replace thermostat battery.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
October
Inspect and test gas fireplace and light pilot (if applicable)
Inspect and vacuum all window/door screens
Inspect weather stripping around exterior doors
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
November
Clean furnace and A/C condensation lines and pump boxes if applicable
Clean humidifier filter (if applicable)
Check all windows for proper weather sealing. Verify window locks work.
Monitor water softener and furnace filter. Fill/replace as needed.
Test all smoke/CO2 detectors.
December
Test all smoke/CO2 detectors and replace all batteries.
Test/replace garage door keypad batteries.
Clean/sanitize kitchen sink and faucet, check for leaks, and check sealant. Re-seal if necessary.
Empty/clean washing machine drain pump filter.
Adjust/lubricate problem doors/locks.
Monitor water softener and furnace filter. Fill/replace as needed.